English 76
LIGHT-MEASURING MODE SETTING
You can select from 3 types of light-measuring modes.
Multi-section light-measuring:
The exposure is adjusted after sampling from multiple areas of the entire
shooting screen.
Center-weighted light-measuring:
The exposure is adjusted after light is measured from the entire image, but
with emphasis on the center area.
Spot light-measuring:
You can compose the picture and capture the image after first measuring the
light only at the center spot of the monitor.
1 Display the Recording Menu (page 66).
2 Select “EXP MEASURE”, and press the SET button.
h The light-measuring mode menu appears.
n: Multi-section light-measuring
W: Center-weighted light-measuring
Y: Spot light-measuring
3 Select the desired icon, and press the SET button.
h This completes the light-measuring mode setting.
To Next Page
Loading...
Need help?
General
