37 English
CAPTURING AND PLAYING BACK STILL IMAGES
There are two modes for capturing still images. In the single-shot mode, one
image is captured each time the shutter button is pressed. In the sequential
shots mode, when you press the shutter button, several successive images
are captured. For more information about taking sequential shots, please see
page 47.
Shooting single shots
1 Set the camera to the single-
shot mode (page 33).
2 Rest your finger on the
shutter button.
h If the touch sensor
(page 69) has been set to
ON, when the shutter button
is touched, the autofocus
operates and the image is
focused (focus lock).
<If the touch sensor is set
to OFF>
h Engage the autofocus by
pressing the shutter button
halfway.
F5.2
To Next Page
Loading...
Need help?
General
