English 58
USING THE ZOOM
Your camera has two zoom functions: optical zoom and digital zoom.
1 Set the camera to the shooting
mode (page 32), and point the
camera lens at the subject.
2 Press the zoom switch to
compose the desired image.
[T]: Zoom in on the subject.
[W]: Zoom out.
h When the zoom switch is
pressed, the zoom bar appears
on the monitor.
h When the optical zoom factor is
at maximum, zooming stops
temporarily. When [T] on the
zoom switch is pressed again,
the mode changes to the digital
zoom mode and zooming
continues.
3 Take the picture.
HINT
Can’t access the digital zoom?
i The digital zoom cannot be used when the face chaser r or portrait
mode
G
scene function is active, or the focus mode is set to AF seeker
p.
Can’t access the optical zoom?
i When the focus range is set to pan o or during video clip recording, the
optical zoom cannot be used.
Zoom switch [W]/[T]
Zoom bar
Monitor
Pointer
When both optical
and digital zoom
are enabled
Digital zoom (yellow)
Optical zoom
When optical zoom
only is enabled
When digital zoom
only is enabled
To Next Page
Loading...
Need help?
General
