Sanyo VPC E1 - Xacti Camcorder - 6.0 MP User Manual

English iv
SHOOT, PLAY BACK AND SAVE
Install the battery pack
1 Use the supplied charger to charge the battery pack.
h The CHARGE indicator is lit during charging.
h The CHARGE indicator will turn off when the battery pack is fully charged.
h Charging takes approximately 2 hr. 30 min.
2 Open the battery/card compartment cover, and insert the battery pack.
h The battery/card compartment cover is located on the bottom of the
camera.
h Press the ON/OFF button to turn the camera on.
CHARGE indicator
Battery pack
To power outlet
[o] mark
Battery pack charger
[o] mark ON/OFF button

Sanyo VPC E1 - Xacti Camcorder - 6.0 MP Specifications

General

Brand	Sanyo
Model	VPC E1 - Xacti Camcorder - 6.0 MP
Category	Digital Camera
Language	English