Sanyo Xacti VPC-C6 User Manual

English 162
TROUBLESHOOTING
Before taking your camera to the repair shop, check the following table for a
possible solution to the problem.
CAMERA
Problem Cause Action
Reference
page
Power
No power. The battery
pack is dead.
Recharge the
battery pack, or
replace with a
new battery
pack.
Or connect the
AC adaptor
(supplied).
19, 22,
24, 25
The battery
pack has not
been inserted
correctly.
Reinsert the
battery pack,
making sure to
orient it
correctly.
The camera
turns off by
itself.
The power
save function
is operating.
Turn on the
camera again. 26
The camera’s
battery pack
cannot be
charged.
The camera is
turned on.
Turn off the
camera.
—
Shooting
An image is
not captured
when the still
image
shooting
button or video
clip recording
button is
pressed.
The power is
not turned on.
If the power
save function
was activated,
turn the
camera on
before
shooting.
If the camera
was turned off,
press the ON/
OFF button to
turn it on.
26

Sanyo Xacti VPC-C6 Specifications

General

Brand	Sanyo
Model	Xacti VPC-C6
Category	Digital Camera
Language	English