English 40
Exposure correction
When capturing images, you can make the image lighter or darker.
1 Set the main switch to REC.
h To exit the Shooting Setting
Screen, press the MENU
button.
2 While the Shooting Screen is
displayed, toggle the SET
button to the right.
h The exposure correction bar
appears.
3 Toggle the SET button to the
left or right to adjust the
exposure.
h The exposure setting
numerical value is shown at
the left end of the exposure
bar.
h The exposure can be set to a
value from –1.8EV to +1.8EV.
4 Press the SET button or the
MENU button.
h The exposure is set, and the
exposure correction bar
disappears.
HINT
The exposure correction setting is canceled in the following cases:
i When the pointer is set to the center position.
i After a Playback or Option Screen is accessed.
i When the main switch is set to PLAY.
i After the power is turned off.
00:00:1512
MENU button
SET button
Main switch
To Next Page
Loading...
