Sanyo Xacti VPC-C6 User Manual

English 164
Shooting
When zooming
in or out, the
zoom
movement
stops
momentarily.
The optical
zoom has
moved to the
maximum
magnification
position.
Not a
malfunction.
Release the
zoom switch,
and press it
again.
39
There is noise
in the captured
image.
The ISO
sensitivity
setting is too
high.
Set the ISO
sensitivity to a
lower setting.
70
LCD
monitor
No playback
image
appears.
The main
switch is not
set to PLAY.
Set the main
switch to PLAY. 43
Viewing
images
The image is
too dark.
The flash was
blocked by a
finger or other
object.
Hold the
camera
correctly, and
make sure the
flash is not
obstructed.
30
The subject
was too far
away.
Capture the
image in the
range of
operation of the
flash.
174
The subject
was lit from
behind.
Use the forced
flash mode.
60
Use the
exposure
correction
function.
40
Use the spot
light-measuring
mode.
69
There is not
enough light.
Adjust the ISO
sensitivity
setting.
70
Problem Cause Action
Reference
page

Sanyo Xacti VPC-C6 Specifications

General

Brand	Sanyo
Model	Xacti VPC-C6
Category	Digital Camera
Language	English