English 82
4 Toggle the SET button up to select “YES”, and press the SET button.
<ONE ERASE>
h The currently displayed image is deleted.
h To erase other data, select the data, and press the SET button.
<ERASE ALL>
h The Erase Confirmation Screen again appears. To erase the data,
select “YES”, and press the SET button. When data erase is
completed, “NO IMAGE” is shown.
CAUTION
i Data which is protected from accidental erase cannot be erased. To erase
protected data, set the protect setting for the data to off (page 79), and
then follow the data erase procedure.
HINT
i You can also access the One Erase Confirmation Screen from the
Playback Screen by toggling the SET button up.
To Next Page
Loading...
Need help?
General
