Sapling SBP-31 - Before Installation; System and Network Requirements

5
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
To be able to set up an IP-based synchronized clock network, you will need the following items:
• This manual
• A Local Area Network (LAN) that either has access to at least one of the following:
• An in-house NTP server
• The Internet
• A firewall that is open on Ports 80, 123, and 1777
• At least one laptop or desktop computer with access to this LAN and a web browser.
• A router for the LAN that operates on the subnet 192.168.0.##.
• A copy of the Monitor.exe program.
• Security access to all of the above items.
• A crossover cable and PoE injector or for programming the clocks. (Optional - A clock can also
be programmed over a network.)
• A means of keeping a record of the clock serial numbers, locations, and IP addresses. Create a
table like the one shown below:
SERIAL # LOCATION IP ADDRESS
Before Installation - System/Network Requirements