61
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
The digital clock is designed to display time in either a 12-hour or 24-hour format. When the display is set
to the 12-hour format, a circular light will appear in the top left corner of the display to indicate PM, or
disappear to indicate AM. When the display is set to the 24 hour format, the full 24-hour time will appear
on the display; no other lights should appear.
Some examples:
5:30 AM (12-hour format)
5:30 PM (12-hour format)
5:30 AM (24-hour format)
5:30 PM (24-hour format)
The factory default setting for all digital clocks is the 12-hour format. If you wish to set the clock to display
time in a 24-hour format, see the section labeled “Jumper Settings” or “sbdconfig - Display Settings”,
included earlier in this manual.
Reading the Display
To Next Page
Loading...
