Sartorius AZ214 - Configuring Balance Parameters; Setting Parameters via Menu Codes

15
Configuring the Balance
Setting the Parameters (Menu Codes)
You can configure your balance to meet individual requirements by selecting from
the parameters available in the menu.
Example: Adapt the balance to unstable ambient conditions
Menu code 1. 1. 4
Step Key (or instruction) Display
1. Turn off the balance e
2. Turn the balance back on; e
while all segments
are displayed t briefly
1.
$ To navigate within a menu t repeatedly 2.
level; the last menu option is
followed by the first option
9.
1.
3. Select the 2nd menu level p 1. 1.
4. Select the 3rd menu level p 1. 1. 2 o
5. In Menu Level 3:
Select the desired option t repeatedly
1. 1. 4
6. Confirm new setting;
the “o” indicates the currently
set option p >2 sec.
1. 1. 4 o
$ Select the next menu level (here:
move from the 3rd to the 1st level) p
1.
$ Set other menu codes, if desired p, t
7. Store parameter settings t >2 sec.
and exit operating menu
or
$ Exit operating menu
without storing changes e
> Restart the application
0.0 g
·
·
·