Balance Operating Menu
In the operating menu, you can define how your
balance will adapt to ambient conditions and also
how it will work to meet your special requirements.
Changing Menu Code Settings
To select specific functions, you will need to set the
respective menu codes.
The keys have special functions for setting
menu codes:
q (9) = Increases a number by one with each
press (the numbers change in cycles)
t (6) = Confirms and stores a code setting; and
exits the menu
p (7) = Moves to the next of the three numbers
of a code (1st-2nd-3rd-1st, etc.)
The code for “automatic power-on” is 8 5 4.
28
To Next Page
Loading...
Need help?
General