Application Programs
In addition to the functions implemented for weighing, Sartorius Basic
plus
balances
offer you a variety of application programs.
To select an application program or a specific function, set the appropriate
code in the menu. The procedure for setting menu codes is described in detail
starting on page 28.
Tare Memor y
Tare Memory Code 2 1 6
Symbol displayed when a value is stored: NET
Press the v key (8) to store the tare weight. The balance is now automatically
tared so you can weigh again starting with a zero readout.
Practical Example: Tare – Net – Gross Weights
Menu code settings used in the example:
Function Code
Tare memory 2 1 6
Automatic output
of all parameters 7 1 2
With data ID code 7 2 2
Print tare memory 7 3 2
** = including the Signatories of the Agreement on the European Economic Area
** = f act or y sett ing
As an alternative, you can select
this automatic output parameter:
Print net value 7 3 1**
Using Verified Balances as Legal Measuring Instruments in the EU*:
All application programs can be selected on balances used as legal measuring
instruments. Non-metric values are indicated as follows:
Percent = %; Piece count (counting) = pcs; Computed value = o
40
To Next Page
Loading...
Need help?
General