Declarations of Conformity
The C Mark on Sartorius Equipment
In 1985, the Council of the European Community
approved a resolution concerning a new approach to
the technical harmonization and standardization
of national regulations.
The organization for monitoring compliance with
the directives and standards concerning the
C marking is governed in the individual EU Member
States through the implementation of the EC
Directives adopted by the respective national laws.
As of December 1993, the scope of validity for
all EC Directives has been extended to the Member
States of the European Union and the Signatories
of the Agreement on the European Economic Area.
Sartorius complies with the EC Directives and
European Standards in order to supply its customers
with weighing instruments that feature the latest
advanced technology and provide many years
of trouble-free service.
C Marking
The C marking affixed to the equipment indicates
that the equipment meets the requirements of the
following Directive(s):
Council Directive 89/336/EEC “Electromagnetic
compatibility (EMC)”
This Directive regulates the use of equipment that can
cause electromagnetic interference or whose
functioning can be influenced by such interference.
Applicable European Standards:
Limitation EN 50081-1 Residential,
of emissions commercial and
light industry
EN 50081-2 Industrial environment
Defined immunity EN 50082-1 Residential,
to interference commercial and
light industry
EN 50082-2 Industrial environment
87
To Next Page
Loading...
Need help?
General