Accessing the Menu (Example: Code 8 5 4)
– Press e to turn off the balance.
– Turn the balance back on. While all segments are
displayed, briefly hold down t.
– For standard balances, if “-” is displayed next
to the left-hand number, proceed as follows to unlock
the menu:
– For balances with a weighing capacity of <10 kg,
remove the protective cap and move the menu
access switch (4)
in the direction of the arrow.
– For balances with a weighing capacity of ≥10 kg,
remove the larger-threaded cap located on the right
next to the DC jack and move the menu access
switch (4) in the direction of the arrows.
– Press q several times until “8” appears.
– Press p until the 2nd number of the code appears.
– Press q until “5” appears.
– Press p until the 3rd number appears (when
you move to the third number, the previously set
menu code will appear).
– Press q to select “4.”
– Confirming a Menu Code Setting
Press a t key to confirm the code you have just set
(this is indicated by the “o” after the code).
– To store the new menu code setting, press one
of the t keys for more than 2 seconds!
29
▼
▼
▼
▼
▼
▼
▼
▼
To Next Page
Loading...
Need help?
General