Sartorius Docu-pH - Docu-pH+Meter Model: Saving Measured Data

Docu-pH
+
Meter
Model: Saving Measured Data
Features
– 500 data records can be stored in the nonvolatile memory.
– 21 CFR Part 11: Docu-pH
Meter
and DocuClip
®
have been developed for use in quality
management systems (for example, GLP, ISO 17025, 21 CFR Part 11).
– Sample ID: Input a six-digit number for each dataset.
– Set logging interval: allows you to enter the time interval for automatic data logging
with a calibration reminder between 1 seconds and 99 minutes in the Setup Menu.
– Allows you to display and print out data records.
– Parallel to data logging, the data are always printed out on an interfaced printer.
– Data memory display and settings: see chapter “Default Settings”
Step Press key Display
1. If required, turn on meter e
> First, the Sartorius logo appears,
then the meter information
2. If required, delete old data: m,
O softkey,
Menu: data memory: repeatedly press
delete memory
q softkey
3. Start saving to data z
memory
4. If required, change sample ID
ID softkey
5. Change 6-digit number Repeatedly press
Q softkey,
O softkey
6. Save changed sample ID
OK softkey
23
Stable