7
Getting Started
Storage and Shipping Conditions
Do not expose the pH/mV meter unnecessarily
to extreme temperatures, moisture, shocks, blows
or vibration.
Unpacking the pH/mV Meter
§ After unpacking the pH meter, please check
it immediately for any visible damage.
$ If any sign of damage is visible, proceed as directed
in the chapter entitled “Care and Maintenance,”
under the section on “Safety Inspection.”
It is a good idea to save the box and all parts of the
packaging until you have successfully installed your
portable meter. Only the original packaging provides
the best protection for shipment
. Before packing
your portable meter, unplug all connected cables
to prevent damage.
Equipment Supplied
The equipment supplied includes the components
listed below:
– pH meter
– AC adapter
– Electrode holding arm
– Technical buffers; pH = 4.00 and 7.00 at 25°C:
One capsule each for producing 100 ml of buffer
solution; pH = 4.00 ml and pH= 7.00
$ The pH/mV meter is also available in sets (including
electrode/DocuClip
®
). For more information, please
contact your local dealer or Sartorius directly.
Connecting the Equipment to AC Power
$ Use only the original Sartorius power adapter
supplied:
In Europe: 102 078.1.
This AC power adapter has protection rating IP20 in
accordance with the European standard EN 60529.
§ Plug the AC adapter into the power jack.
To Next Page
Loading...
