Installing Electrodes
You can use the following electrodes with the meter:
– pH combination electrode with BNC connector
– Separate 2.5 mm phone plug for ATC probe
– Ion-selective electrode or ORP (redox) electrode with
BNC connector
– Sartorius electrodes with DocuClip
®
– The Docu-pH
Meter
automatically recognizes the types
of the ACT probes at the temperatures listed below:
– NCT10 kohm: +14°C to 76°C
– NCT30 kohm: –5°C to 40°C
– PT1000: 4°C to 105°C
Installation:
1. Remove the protective cover from the electrode.
2. Prior to first use of the pH electrode, soak it
overnight in an electrode filling solution or electrode
storage solution (3 mol/L KCl solution).
9
To Next Page
Loading...
