Care and Maintenance
Cleaning
§ Unplug the AC adapter from the wall outlet.
§ Clean the pH meter using a piece of cloth which has
been wet with a mild detergent
§ Wipe down the pH meter with a soft cloth.
$ Cleaning the electrode: refer to the Instructions for
Use of the particular electrode.
! Make sure that no liquid enters the instrument.
!Do not use any aggressive cleaning agents
(solvents or similar agents)
Safety Inspection
If there is any indication that safe operation of the
equipment is no longer guaranteed:
§ Disconnect the power cord from the outlet
> Ensure that the equipment cannot be used during
this time. Notify your nearest Sartorius Service
Center.
Maintenance and repair work may only be
performed by specialized service technicians.
Recycling Instructions
To ensure adequate protection for safe shipment,
your instrument has been packaged to the extent
necessary using environmentally friendly materials.
After successful installation of the instrument, you
should return this packaging for recycling because
it is a valuable source of secondary raw material.
For information on recycling options, including
recycling of old weighing equipment, contact your
municipal waste disposal center or local recycling
depot.
33
To Next Page
Loading...
