10
Operation
Item Description
1 Weight units
2 Displays the menu level
3 Taring
4 Symbol for “GLP printing mode
active"
5
Symbol for “Printing mode active"
6 Application program active
7 Data output:
Press this key to send readout
values to the built-in data
interface.
8 Calculated-value indicator:
not a weight value
9 Start the application program
10 Symbol: Gross or net
11 Select an application program |
open the operating menu
12 Symbols for active application
(W, Z, L, V, R, A, C)
Item Description
13 Delete (Clear Function)
This key is generally used to
cancel functions:
– Quit application program
– Cancel calibration | adjustment
routine | Exit menu
14 Start calibration | adjustment
routine
15 On | Off
16 Symbol: Calibration | adjustment
function
17 Symbols for “zero range«
(verified models only)
18 Level indicator
19 Weight value displayed in selected
weight unit
Symbol:
<< Exit the operating menu
< One menu level higher
V Scroll throughmenu items
> Next item on current menu level
↵ Select a parameter setting
Overview of Display and Control Panel
To Next Page
Loading...
