Preparation
t Select the Animal weighing application
in the menu:
see “Configuration"
t Set the following parameters:
Applic.ation programs
Animalw. Animal weighing
Activty. Animal activity
calm Stable readout
o active Unstable
v.active Very unstable
Start
manual
o Autom.atic
o = Factory setting
Printout: Animal weighing
m D e f 2 0 : Number of
subweighing
operations
x-Net + 410.1 g : Calculated average
27
Animal Weighing/Averaging
Display symbol: V
Purpose
This application is used to determine the
weights of unstable samples (e.g., live
animals) or to determine weights under
very unstable ambient conditions. With
this program, the balance calculates the
weight as the average of a defined number
of individual weighing operations (also
referred to as “subweighing operations”).
Changing the Number of Subweighing
Operations
Activate function:
Press the b key
Select the desired number of measurements
(1 to 100):
In increments of 1: Press the b key
briefly
Increments of 10: Press and hold the
b key.
The selected number of measurements is
stored in battery-backed memory.
To Next Page
Loading...
