Sartorius Entris - Basic Weighing Function; Features and Preparation; Simple Weighing Example

11
Basic Weighing Function
Features
– Tare the balance
– Printing weights
Preparation
t Switch on the balance:
Press the e key
t Tare the balance, if necessary:
Press the w key
y If necessary, change the configuration
settings:
see the chapter entitled “Configuration"
y If desired, load the factory settings:
see the chapter entitled “Configuration"
Additional Functions:
y Switching off the balance:
Press e
Example
Simple Weighing
Step Press key Display | Printout
1. Switch on the balance
e 0.0 g
Self-test is performed,
followed by automatic
initial tare function.
2. Place container on weighing pan
+ 11.5 g
(in this example 11.5 g).
3. Tare the balance
e 0.0 g
4. Place sample in container + 132.0 g
(in this example: 132 g)
5. Print weight r N + 132.0 g