Sartorius Entris - Parameter Settings Overview (Part 2)

18
Parameter settings: Overview
ο = Factory setting; √ = User-defined setting
Level 1 Level 2 Level 3 Level 4 Menu code
Setup Bal.Scal. Ambient Very stable 1. 1. 1. 1
Balance conditions ο Stable 1. 1. 1. 2
parameters (Filter Unstabl 1. 1. 1. 3
adaptation) Very unstable 1. 1. 1. 4
App.filt. ο Final.Rd 1. 1. 2. 1
Application filter  Filling 1. 1. 2. 2
Stability 1/4 Dig. (digit) 1. 1. 3. 1
range 1/2 Dig. (digit) 1. 1. 3. 2
1 - Digit (digit) 1. 1. 3. 3
ο 2 - Digit (digit) 1. 1. 3. 4
 4 - Digit (digit) 1. 1. 3. 5
8 - Digit (digit) 1. 1. 3. 6
Taring w/o stb (W/o stability) 1. 1. 5. 1
Taring ο w/ stab (After stability) 1. 1. 5. 2
Aut.zero Off 1. 1. 6. 1
Auto zero ο On 1. 1. 6. 2
WT.UNIT For list of units, see Chapter 1. 1. 7. 1
Basic weight Toggling between
through unit weight units” 1. 1. 7.23
Disp.Dig. ο all 1. 1. 8. 1
Display Minus 1 1. 1. 8. 2
accuracy  divis. 1 1 interval 1. 1. 8. 6
Cal./adj. Cal. ext. External cal./adj. 1. 1. 9. 1
Function of the ο Cal. int Internal cal./adj. 1. 1. 9. 2
of the Q key Blocked Q blocked 1. 1. 3. 3
Cal.Unit Unit ο Grams 1. 1.11. 1
for calibration Kilogr.ams 1. 1.11. 2
weight Pounds 1. 1.11. 3