24
Example: Counting parts of equal weight
Parameter settings: Applic. - Count. (menu code 2. 3.)
Step Key (or instruction) Display/Data output
1. Place empty container +
22.6 g
on the balance
2. Tare the balance w 0.0 g
3. Add reference sample quantity to
container (in this example: 20 pcs)
4. Changing the reference sample quantity b ref 10
pcs
5. Select reference sample quantity: Repeatedly: b
In increments of 1 (1, 2, 3, ..., 100) Press briefly
b
In increments of 10 (10, 20, ..., 100) press and hold
ref 20
pcs
6. Confirm selected reference
u + 20
pcs
*
sample quantity and start nRef 20 pcs
the application. The current wRef 1.07 g
reference weight remains saved
until a new reference is set or
the power supply is interrupted.
7. Add desired number of pieces +
500
pcs
8. If desired, print quantity r Qnt + 500 pcs
9. Toggle display between mean + 1.07 g
G
*
piece weight, weight, quantity + 535.0 g
*
Repeatedly:
b + 500
pcs
*
10. Unload the balance – 21
pcs
*
11. Repeat as needed, starting from Step 7
12. End “Counting"
c 0.0 g
To Next Page
Loading...
