14
Changing a Menu Code Setting (Change Mode):
Slide the menu access switch
(7)
in the direction of the arrow (the
menu access switch is located under a protective cap on the front,
right-hand side of the scale). Status symbol
"C"
will be displayed (in-
dicating the change mode).
Press the tare control once the desired numeral is indicated in the
hundreds, tens and ones digits, respectively.
The
"o"
symbol displayed indicates the current setting.
Returning to the Weighing Mode:
Slide the menu access switch back to its original setting.
Status symbol
"L"
will now be displayed.
Press the tare control once
"0"
is indicated in the numerical se-
quence.
lf you have changed a menu Code, it will be stored as soon as the
display returns to the weighing mode.
Auto Zero Function
The scale has an automatic zero tracking function, known as "Auto
Zero" (can be turned off by menu code - see "Scale Operating
Menu"). Any changes off the zero
≤ 0.5 digit (for the G 150 D)
≤ 1 digit (for the G 200 D)
≤ 1 digit (for the G 500)
To Next Page
Loading...
