Sartorius MA150C-000115V1 - Page 29

Step Key (or Instruction) Display/Printout
8. Confirm the temperature u
9. Select the Initial weight c
parameter 2 ƒ y
10. Confirm the Initial weight u
parameter
11. Select the On setting and y
confirm u
12. Enter the target weight 2.0 3 ƒ x
u
13. Confirm the target weight u
14. Select the Start of analysis c
parameter y
15. Confirm the Start of analysis u
parameter
16. Select the With stability,
after ENTER key setting x
and confirm u
17. Exit the PROGRAM function 3 ƒ c
28