Configuring Printout Formats
For a number of application programs, you
need to set initialization values. All values
upon initialization or only the main values
can be automatically printed as soon as
you have configured this in the Setup
menu:
Auto print upon ini-
tialization
Weights and calculated values can be
printed as numeric values either with a
preceding data ID code (numeric value with
22 characters) or without one (numeric
value only 16 characters). See also the
section on
Line format in the
chapter entitled “Data Output Functions”.
You can generate an ISO/GLP print-out
always or only for calibration/adjustment
or turn off this option. See also page 131.
129
Generating an ISO/GLP Printout
In the Setup menu, you have a choice of
three settings:
– No ISO/GLP printout generated (
Off)
– ISO/GLP printout generated only for cal-
ibration/adjustment (
Only for
calibration/adjustment)
– Every printout is an ISO/GLP-compliant
report (
Always on)
Auto print checkweighing results:
automatic printout of a weight when
it lies within the preset limits at stability
Auto print with time-controlled func-
tions: automatic printout of weights
after a preset time has elapsed or at
a defined time
Printout of intermediate or final evalua-
tion from the application 3 memory
(totalizing, formulation and statistics);
generate by pressing the
MR soft key
Generating Printouts Acceptable for
Legal Metrology:
You can configure the Setup menu
of the balance to generate data records
that are acceptable for legal metrology
on a Sartorius printer:
– YDP02
– YDP03
– YDP01IS
– YDP01IS Label
– YDP02IS
– YDP02IS Label
– YDP04IS
– YDP04IS Label
To Next Page
Loading...
