Application Programs
Cubis MSE Operating Instructions 59
Example: Totalizing weight values
Parameter configuration: Applic. - total - comp.prt: On
Step Press key Display/Printout
1� Tare J 0.0 g
2� Place sample on the balance (in this example: 380 g) + 380.0 g
3� Save the value to memory V + 380.0 g
Comp 1+ 380.0 g
4� Remove sample + 0.0 g
5� Place the next sample on the balance (in this example: 575 g) + 575.0 g
6� Save the value to memory V + 955.0 g
+ 575.0 g
Comp 2+ 575.0 g
7� Remove sample + 0.0 g
8� View value in totalizing memory S + 955.0 g G
9� Weigh further components as desired Repeat steps 5 and 6 as often as necessary
10� Print total weight and delete the totalizing memory F 0.0 g
S-Comp+ 2117.5 g
To Next Page
Loading...