3
Sartorius Research
R 160 P
With this Sartorius Semi-Microbalance you have acquired a
high-quality electronic weighing Instrument that will ease your
daily work load.
Before you operate your new balance, please read these Instal-
lation and operating instructions carefully.
Pursuant to the German Directive for the Implementation
of Regulations for Prevention of Accidents "Elektrische
Anlagen und Betriebsmittel (VBG 4)" [Electrical Installa-
tions and Equipment] of April 1986, it is hereby certified
that the equipment delivered, "Semi-Microbalance, model
R 160 P" is manufactured and tested in compliance with
the following DIN/VDE regulations
DIN IEC 348/VDE 041 1:
Safety requirements for electronic measuring apparatus
DIN IEC 380/VDE 0806:
Safety of electrically energized office machines
DIN IEC 601 /VDE 0750:
Safety of medical electrical equipment
When you use electrical equipment in installations and
under ambient conditions requiring higher safety Stan-
dards, you must comply with the provisions as specified
in the applicable regulations for installation in your coun-
try.
To Next Page
Loading...
