6
Installation
Instructions
Choose a suitable place to set up your balance. lt should not be
exposed to the following:
- heat radiation
- aggressive/corrosive substances
- vibrations
- drafts.
Your Sartorius balance will provide accurate readouts even
when it is exposed to unfavorable weighing conditions. You can
adapt it to your requirements simply by changing the menu
code settings of the balance operating program. For this pur-
pose, please refer to pages 13 -15.
After you have plugged your balance into a wall outlet, al-
low for at least 2 hours' warmup.
Important Note
Unplug the balance before you connect or disconnect peripher-
als.
To Next Page
Loading...
