Sartorius Sartocheck 3 plus - Service Operations; Hardware Configuration

38
7.16 Service (F7 – Main Menu)
In the Service menu, the hardware and software configurations are performed,
the calibration of the internal pressure sensor is performed and the users of the
Sartocheck® 3 plus are managed or new users are created.
F1: Load program from TU
F2: Hardware configuration
F3: Software configuration
– Language
– Date format
– Time
– Reference pressure data
– Unit of measure
– Record data
– Management unit parameters
F4: Calibration and adjustment
Internal pressure sensor
F5: User data management
– Assign new user
– Delete user
While the Service menu is active; access to visualize a currently running test is
not allowed.
7.16.1 Hardware Configuration (F2-Service)
F1: External reference volume
7.16.1.1 External Reference Volume
In the hardware configuration, the volume of the external reference
container is set.
Fig. 7-51 | Service Menu
Fig. 7-52 | Service Menu:
Hardware configuration
Fig. 7-53 | Service Menu:
Hardware configuration