2.2 Proper Use
The Sartocheck
®
3 plus is a filter
integrity tester. It was exclusively
developed, constructed and built
for the industrial and commercial
purpose of conducting filter tests
in pharmaceutical and biotechno-
logical production and laboratory
operations.
The unit is not intended for use in
or with explosive atmospheres!
The system is exclusively designed
for the purpose defined above.
Any other application above or
beyond this or any modifications
to the unit without the written
permission of the manufacturer
is not considered proper use.
Sartorius Stedim Biotech GmbH
cannot assume liability if
Sartocheck
®
3 plus integrity test
units are subjected to improper use
or
improper operation. Sartorius
Stedim
Biotech is not liable
for
any damages resulting therefrom.
The operator bears the sole risk.
Proper use also includes compli-
ance with operating, inspection and
maintenance conditions prescribed
by the manufacturer. Non-com-
pliance with the warnings in the
operating instructions and instal-
lation instructions, in particular,
constitutes improper use of the
equipment. Only EMC-tested con-
trol leads and accessories may be
used. Units may only be returned in
their original boxes or appropriate
secure packaging. No liability can
be accepted for transport damage.
6
2 Overview and Proper Use
2.1 Overview: Sartocheck
®
3 plus
Fig. 2-1 | Overview
Device figure
1 printer
2 display
3 keypad
4 Status LEDs
!
1
2
3
4
To Next Page
Loading...