Sartorius Signum 2 - Automatic Data Output Configuration

89
Automatic Data Output (SBI)
You can have results of measurement printed automatically
1)
.
You can configure the autoprint function to print at certain
intervals (measured in display updates
2)
and define whether
printing is dependent on stability of the scale
3)
. How often
the display is updated depends on the operating status and
model of the equipment.
Examples:
N + 153.00 g Net weight
Stat Display blank
Stat L Display underload
Stat H Display overload
Setting:
1) 3)
“Automatic output without stability”
or
“Automatic output with stability”
Factory setting: Manual after stability;
i.e., automatic data output function off.
2)
Time-dependent automatic data output;
Intervals: 1, 2, 10 or 100 display updates
Factory setting: 1 display update
Signum 2 and 3 only
External Keyboard Functions (Computer Keyboard)
Configuration
setup: barcode: ext.keyb
The alphanumeric key codes refer to exclusively to the
German keyboard layout. The alphanumeric keys are as follows
(note: “Shift” key required for some of these characters):
a – z, A – Z, 0 – 9, <space>, Ñ,.\+’<>/ì$@%/();=:_?*
Application function keys:
Computer keyboard Signum 2 and 3
F1 ) key
F2 ( key
F3 n key
F9 D key
F11 M key
F12 k key
Print p key
Home c key
Backspacec key c key
ESC E key
Interface Port