Data Transfer and Statistical Evaluation in Manual
Mode
Printer Configuration
Configure the following in the statistics application
menu:
– Statistics program (-A3-) = 1
(factory setting = 1)
The display shows “STAT.”
– Print measured values (-A4-) = 1
– Store measured values manually (-P6-) = 0.
Recording and Evaluating Data
§ Press the key to clear the statistics memory prior
to initial data transfer
> Any values in memory are evaluated and the results
printed, and then the statistics are deleted.
§ Place the first sample on the weighing pan
§ Press the key to store the value
> The value may be printed as well, depending on printer
configurations
> The display shows the number of values stored
13
To Next Page
Loading...
