38 Programming SATEL
1. Click on the button in the DLOADX program.
2. A drop-down menu will be displayed. Select the “ISDN/GSM modem” in it. A window will
open in which modem initialization information will be displayed.
3. Send an SMS message to the telephone number of INTEGRA 128-WRL control panel /
GSM module connected to the control panel. In the case of INTEGRA 128-WRL, the SMS
message should have the following form:
xxxx=csd= (“xxxx” – the control command programmed in the control panel, initializing
communication with the DLOADX program) – the control panel will call the
programmed telephone number of the computer, the data will be sent using CSD
technology,
xxxx=yyyy= (“xxxx” – the control command programmed in the control panel, initializing
communication with the DLOADX program; “yyyy” – telephone number of the computer
to which the control panel is to connect) – the control panel will call the telephone
number sent in the SMS message (the computer telephone number programmed in
control panel will be ignored), the data will be sent using CSD technology.
In the case of GSM module connected to the control panel, the SMS message should
have the following form:
xxxxxx. or xxxxxx= (“xxxxxx” – the control command programmed in the GSM module,
initializing communication with the DLOADX program through modem) – the control
panel will call, via the GSM module, the programmed computer telephone number,
xxxxxx=yyyy. or xxxxxx=yyyy= (“xxxxxx” – the control command programmed in the
GSM module, initializing communication with the DLOADX program through modem;
“yyyy” – computer telephone number to which the control panel is to connect) – the
control panel will call, via the module, the telephone number sent in the SMS message
(the computer telephone number programmed in the control panel will be ignored).
4. The DLOADX program will answer the connection automatically or the program user must
accept establishing the communication (which depends on the settings programmed in
the “Configuration” window, “Modem” tab). A suitable message will inform about the
connection being established.
Connection initiated by the control panel – built-in modem 300 bps
Control panel settings:
• program the telephone number of modem connected to computer.
DLOADX program settings:
• configure the modem communication parameters.
1. Click on the button in the DLOADX program.
2. A drop-down menu will be displayed. Select the “Modem 300 bps” in it. A window will
open in which modem initialization information will be displayed.
3. In the LCD keypad connected to the control panel, start the START DWNL-TEL function
([code] DOWNLOADING START DWNL-TEL). The function is available to the installer,
administrator and user having the DOWNLOADING STARTING right.
4. The control panel will call the programmed computer telephone number.
5. The DLOADX program will answer the connection automatically or the program user must
accept establishing the communication (which depends on the settings programmed in
the “Configuration” window, “Modem” tab). A suitable message will inform about the
connection being established.
To Next Page
Loading...
