48 Programming SATEL
With temporary blocking [With time bypass] – the partition can be armed/disarmed by the
user, but on arming the partition is blocked for a time indicated by the user or determined
by the installer (see DEFAULT BLOCK TIME option). When blocked, the partition can only be
disarmed by the user having the ACCESS TO TEMPORARY BLOCKED PARTITIONS right. An alarm
can end the blocking (see ALARM – DISARM ALLOWED option).
Fig. 3. Example of partition settings in the DLOADX program.
Follow type “AND” [Dependent “AND”] – the partition controlled by status of other partitions.
You should indicate the partitions whose status affects the dependent partition. The
dependent “AND” type of partition will be armed when all indicated partitions are armed
(start of the procedure of arming the last of the indicated partitions will initiate the
procedure of arming the dependent partition). The dependent “AND” type of partition will
be disarmed when any of the indicated partitions is disarmed. This type of partition is
recommended in case of shared corridors.
Follow type “OR” [Dependent “OR”] – the partition controlled by status of other partitions.
You should indicate the partitions whose status affects the dependent partition. The
dependent “OR” type of partition will be armed when any of the indicated partitions is
armed (start of the procedure of arming any of the indicated partitions will initiate the
procedure of arming the dependent partition). The dependent “OR” type of partition will be
disarmed when all indicated partitions are disarmed.
To Next Page
Loading...
