Satel Integra 32 - Volume;Filter

SATEL INTEGRA 83
Sign. new trouble [New trbl.sign.] – with this option enabled, the keypad can audibly signal
the occurrence of a new trouble (if the TROUBLE MEMORY UNTIL REVIEW option is enabled).
New trouble signaling is cleared after the troubles have been reviewed by the user.
Show code entering [Show code ent.] – with this option enabled, entering the code is
presented on the keypad display by asterisks.
Show keypad name [Name (2nd row)] – with this option enabled, the keypad name is
presented in the lower line of the display.
Exit delay clearing enable [Fin.exit delay] – with this option enabled, the exit delay time in
partitions with the EXIT DELAY CLEARING option enabled can be shortened after pressing in
turn the 9 keys.
Show viol. zones [Zone violation] – with this option enabled, violating the CHIME signal
triggering zone result additionally in the zone name being displayed.
Auto-Arm delay countdown [Auto-arm delay] – with this option enabled, the auto-arm delay
countdown in partition is signaled acoustically.
Displ. mode switching [Dspl.mode chg.] – with the option enabled, you can toggle the
display between the standby mode and the partition status display mode by using the 9
key.
Show disarm messages [Show disarming] – if this option is enabled, the keypad displays
the disarming message irrespective of how the system has been disarmed. If this option is
disabled, the keypad displays the disarming message only when the system has been
disarmed from this keypad.
Show arm messages [Show arm] – if this option is enabled, the keypad displays the arming
message. If this option is disabled, the arming message is not displayed.
Communication RS – if this option is enabled, it is possible to connect a computer with
GUARDX program to the LCD keypad RS-232 port.
Quick control [Control (8#)] – if this option is enabled, the OUTS CONTROL user function can
be started by pressing in turn the 8 keys (without the need to enter the user code).
Zones
in LCD keypad – if you select this option, the keypad zone will be supported.
Not used – if you select this option, the keypad zone will not be supported.
Auto-backlight
Entry delay in part. – if you select this option, the backlight will be additionally turned on
when the entry delay countdown begins in a selected partition.
viol. of zone – if you select this option, the backlight will be additionally turned on when
a selected zone is violated.
no – if you select this option, the backlight will be turned on only when the user presses any
button.
8.1.2 Volume/filter
You can adjust the volume level for INT-KLCD, INT-KLCDR and INT-KLFR keypads.
Volume – volume level of the beeps generated during keypad operation (key pressing,
confirmation of performed operation, etc.).
Volume – chime – volume level of the beeps generated after zone violation (CHIME).
Volume – entry delay – volume level of the entry delay beeps.
Volume – exit delay – volume level of the exit delay beeps.
Volume – fire – volume level of the fire alarm beeps.
Volume – alarm – volume level when signaling burglar, panic and medical alarms