SATO CL412e - Format Specification

Unit 4: Standard Command Codes
E/Pro Programming Reference
4-25 PN: 9001096E
FORMAT SPECIFICATION
FUNCTION
Specifies small label format. Only applicable to the M10e printer.
FORMAT
<ESC>_N
a = Field number (01 to 99)
b = Data digit (01 to 99)
Place before <ESC>H and <ESC>V.
EXAMPLE
<ESC>A
<ESC>A1,06363060<ESC>PD,600,1020,0,0
<ESC>_F
<ESC>_N,01,04<ESC>V100<ESC>H200<ESC>L0202<ESC>XMABCD
<ESC>_N,02,07<ESC>V200<ESC>H200<ESC>L0202<ESC>B103200*11111*
<ESC>_N,03,02<ESC>V100<ESC>H400<ESC>L0202<ESC>XM22
<ESC>_D,01,AAAA<ESC>_D,02,*22222*<ESC>_D,03,22<ESC>_Q,1
<ESC>_D,01,BBBB<ESC>_D,02,*33333*<ESC>_D,03,33<ESC>Q,2
<ESC>_D,01,CCCC<ESC>_D,02,*44444*<ESC>_D,03,44<ESC>Q,4
<ESC>Z
OUTPUT
(4-17)
NOTES
Only 1-D barcode characters can be specified under <ESC>_N.
Specify the small label print number with <ESC>_Q.
Do not specify command for registration after <ESC>_N. If specified, accurate print motion might not
be conducted.