8 CL608e/612e
2. Introduction Operation Manual
2.6 Switches And Sensors
Ribbon End Sensor: This sensor is a motion detector sensor that
signals the printer when the ribbon supply is
turning.
Head Open Switch: When the print head is opened, this switch
is activated and the printer will stop printing.
Label Sensor Unit: This sensor unit contains two types of sen-
sors, one for label gap (movable, 25 - 90mm
from the inner label edge)) and one for
I-Mark sensing (fixed).
Ribbon Motion
Sensor
Label Sensor
Unit
To Next Page
Loading...
