Operation Manual 2. Introduction
CL608e/612e 11
2.7.3 Optional Interface (USB)
This printer operates by being connected to a computer.
1. Turn off the power of the printer. Using an interface cable con-
nect the computer to the optional interface connector at the rear
panel of the printer.
2. Interface Cable
USB connector for a printer is specified as a Type B Receptacle.
Please use a Type B cable when you connect it with the printer.
2.7.4 Optional Interface (LAN)
This printer operates by being connected to a Network.
1. Turn off the power of the printer. Using an interface cable con-
nect the computer to the optional interface connector at the rear
panel of the printer.
2. Interface Cable
Please use a cross-cable when you connect one printer to one
computer. If you connect a printer to a HUB, please use a
straight cable.
To Next Page
Loading...
