Operation Manual 4. Media Loading
CL608e/612e 35
Step 6 Load the ribbon behind and over the top of the rib-
bon rewind spindle and tape it to the ribbon core.
Step 7 Manually turn the rewind spindle to wrap the ribbon
onto the core making one to two turns to secure it.
Step 8 If the labels or tags are already loaded, close the
print head assembly by pushing downward on the
green tab until it latches closed.
Note: Run a test print to ensure that the labels and rib-
bons are loaded correctly.
Tape
Print Head
Assembly
Green Tab
To Next Page
Loading...
