Unit 2: Technical Data
CT4i Operator’s Manual
2-2
PHYSICAL CHARACTERISTICS
Width 7.8 in. (198 mm)
Height
8.8 in. (225 mm)
Depth
7.1 in. (181 mm)
Weight
5.5 lbs (2.5 Kg) excluding AC adaptor
ENVIRONMENTAL (EXCLUDING MEDIA)
Operating Temperature/Humidity 5° to 35°C @ 30 to 80%RH
Storage Temperature/Humidity -5° to 60°C @ 30 ~ 90%RH, non-condensing (NA for media)
POWER SUPPLY
Input Voltage (AC)
100-240 Volts AC +/- 10%, 50/60 Hertz
Rated Input voltage: 25 V DC
Rated current: 1.5 A
Input Voltage (DC)
Rated voltage: 24.0 VDC - 25.25 VDC
Rated current: 2 A (Current peak: 13 A)
Power Consumption 90 Watts (when print ratio is 30%)
PROCESSING
CPU 32 Bit RISC
Flash ROM 4 Megabytes
SDRAM 16 MB
PRINTER LANGUAGE
Standard SATO Barcode Printer Language (SBPL) 4.3
INTERFACES
Standard configurations
Either 1) USB 2.0 with RS-232C or
2) USB 2.0 with LAN (10BASE-T/100BASE-TX Automatic Switching)
User installable Optional Inter-
face Board
(USB with RS232C model only)
IEEE1284, 802.11g Wireless Wi-Fi, Bluetooth
To Next Page
Loading...
