SATO GL408e - EPC Code Write Command Details

GL408e / GL412e Barcode Thermal Printer
Operation
8.3 Cutting the media
You can separate the labels with the simplified cutter.
Fig. 12 Simplified cutter
CAUTION!
Risk of injury at the simplified cutter!
The simplified cutter used to cut the labels may
cause cuts and skin abrasions.
Therefore:
– Use caution when handling the simplified cutter.
– When in doubt, wear protective gloves.
1 Simplified cutter (tear off blade)
To separate the labels:
Fig. 13 Label
1. Print a label.
2. Pull lightly down the label (1), from one media edge to the
other.
18