SATO M-84PRO - Page 23

Section 2. Installation
SATO M-84PRO PN 9001105 Rev. A Page 2-11
ON LINE LED, illuminated when printer is ready to receive data. Toggled on/off with LINE
key.
LINE
Momentary switch.
Pressing this key toggles the printer between the on-
line and off-line mode. When the
printer is on-line, it is ready to receive data
from the host. This key acts as a pause during a print job by taking the printer
off-line. It can also be used as a Pause function key to stop the printer during
the printing process.
FEED Momentary switch. Pressing this key feeds one blank label when the printer is
Off-Line. When the printer is On-Line, another copy of the last label will be
printed (Reprint W/Feed must be enabled in the LCD panel Service Mode).
DSW DIP switch array to set operational parameters of the printer.
LCD 2 Line x 16 Character LCD display. Used for setting operational parameters of
the printer and displaying error conditions.