1
4. Input the Barcode data. The standard EAN13
code requires 12 digits. Press <ENTER>
The 13th digit is calculated automatically.
5. Enter the required number of labels and
press <ENTER>.
Your labels will be printed immediately.
6. The printer will returns to screen 1 of the
selected format. If you wish to select a new
label format press the <Page Up> key
to return to the Label Format selection screen.
NOTE that for safety reasons, there is no
serrated edge to tear your labels.
Tear off the labels using a downwards and
sidewards motion.
PAGE UP key
14
To Next Page
Loading...
