SATO WS412TT - Media and Ribbon

114
8
Specifications
Media
and
R
ibbon
8.2
Media and Ribbon
Properties Description
Media Size Continuous Mode
Length (TT): 8 mm ~ 996 mm (including liner 11 ~ 999 mm)
Length (DT): 8 mm ~ 996 mm (including liner 11 ~ 999 mm)
Width: 22.4 mm ~ 115 mm (including liner 25.4 ~ 118 mm)
Tear-Off Mode
Length (TT): 8 mm ~ 996 mm (including liner 11 ~ 999 mm)
Length (DT): 30 mm ~ 996 mm (including liner 33mm~999m)
Width: 22.4 mm ~ 115 mm (including liner 25.4 ~ 118 mm)
Dispenser Mode
Length (TT): 23.4 mm ~ 150.4 mm (including liner 26.4 ~ 152.4
mm)
Length (DT): 35 mm ~ 150.4 mm (including
liner
38mm~153.4mm)
Width: 22.4 mm ~ 115 mm (including liner 25.4 ~ 118 mm)
Cutter Mode
Length (TT): 19.4 mm ~ 993 mm (including liner 22.4 ~ 996 mm)
Length (DT): 35 mm ~ 993 mm (including liner 38mm~996mm)
Width: 22.4 mm ~ 115 mm (including liner 25.4 ~ 118 mm)
Media Thickness: 0.06~0.19mm
Max Roll Diameter Size: 127 mm (5 inches)
Max Roll Diameter Size for External Unwinder: 216 mm (8.5
inches)
Media Type Thermal Transfer Label
Thermal Transfer Tag
Direct Thermal Label
Direct Thermal Tag
Roll Paper (Face-Out/Face-In)
Fanfold Paper
Ribbon Size Length: 100 m (φ Core Size: 0.5 inch), Max 300 m (φ Core Size: 1
inch)
Width: 40 mm ~ 110 mm
Ribbon Type Wax, Wax-Resin, Resin
Coated Side In or Coated Side Out