WS4-TT-r01-30-12-16TM
3.3.2 Dump Mode
The printer enters Dump mode after running a self-test. In this mode, characters
are printed in hexadecimal codes, allowing users and engineers to debug the
system.
To return to the online mode:
■
Turn off the printer and turn it on again.
■
In Printer Utility 2013, in the Navigation pane, click Tool. In the Properties
pane, click Reboot Printer and click Send.
This is applicable for SZPL, SDPL and SEPL.
To Next Page
Loading...
