SATO WS412TT - Appendix A: DIP Switch

Appendix
A
DIP
Sw
itch
130
Appendix A: DIP Switch
1
Switch between the
firmware mode and
Atmel mode.
2
Enable or disable the
watchdog.
ON: Firmware mode. It ON
boots the printer from
the flash memory.
OFF: Atmel mode. It
boots the printer from
CPU ROM.
Important In Atmel
mode, DIP 2 (watchdog)
must be set to OFF.
ON: Enable watchdog ON
OFF: Disable watchdog
3 Reserved. N/A
OFF
4 Reserved. N/A
OFF
5 Reserved. N/A
OFF
6 Reserved. N/A
OFF
7
Select the printer type.
It needs to be used
with DIP 8.
8
Select the printer type.
It needs to be used
with DIP 7.
DIP 7 <ON>, DIP 8 <ON>
Printer Type: For
developers to debug
DIP 7 <ON>, DIP 8 <OFF>
Printer Type: DT Reserve
DIP 7 <OFF>, DIP 8 <ON>
Printer Type: DT global
DIP 7 <OFF>, DIP 8
<OFF>
Printer Type: TT global
Depending on
the printer type
Depending on
the printer type
DIP Switch Default