SATO WS412TT - Page 45

3
System
Mode
Self
-
Test
and
Dump
mode
WS4-TT-r01-30-12-16TM
42
If your printer has a Wireless LAN module, your SZPL configuration label will
contain the following entries:
1.
Interface
It detects if your printer connects to a network. When it’s online, it shows “UP”;
when it’s offline, it shows “DOWN.”
2.
DHCP
When DHCP is enabled, it assigns an IP address to your printer automatically.
3.
IP Address
The IP address of your printer. When DHCP is enabled, it shows the automatically
assigned IP address; when DHCP is disabled, it shows the manually specified IP
address.
4.
Netmask
The netmask of your printer. When DHCP is enabled, it shows the automatically
assigned netmask; when DHCP is disabled, it shows the manually specified
netmask.
5.
Gateway
The gateway of your printer. When DHCP is enabled, it shows the automatically
assigned gateway; when DHCP is disabled, it shows the manually specified
gateway.
6.
SSID
Short for service set identifier. It is the name of a wireless local area network.
7.
Country Code
The country or region.
8.
Channel
The Wireless LAN channel.
9.
Join
It determines how you connect your printer to a network. It’s either AP (Access