Property Name Description
WPA2-Enterprise authentication.
EAP-LEAP
LEAP stands for Lightweight
Extensible Authentication Protocol. It
changes the WEP key for each session,
preventing attackers retrieving data by
cracking the key.
EAP-TLS
TLS stands for Transport Layer
Security. EAP-TLS requires both a client and a
server to exchange digital certificates to
authenticate each other. It uses Public Key
Infrastructure (PKI) to protect
communication. A server and a client need to
obtain certificates from a certification
authority (CA), and use these certificates to
validate each other’s identity.
EAP-TTLS
TTLS stands for Tunneled
Transport Layer Security. It has two stages.
First, a server sends its certificate to a client
after it received an authentication request.
This certificate is used to create an encrypted
tunnel (TLS tunnel) between the server and
the client. Second, both sides exchange
attribute-value pairs (AVP) through this
tunnel.
PEAP
Short for Protected Extensible
Authentication Protocol. Similar to EAP-TTLS,
it creates an encrypted tunnel between a
server and a client in the first stage. After
that, it starts the second EAP exchange
through this tunnel.
EAP-FAST
FAST stands for Flexible
Authentication via Secure Tunneling. Similar
to PEAP, it has two stages. First, it uses a
Protected Access Credentials (PACs) to create
an encrypted tunnel. Second, it authenticates
the client to the server within the tunnel.
EAP Username The username for EAP authentication. It
To Next Page
Loading...
